Safety features of your vehicle
104
Seat
Forward and backward (1)
To move the seat forward or back
-
ward:
䳜 Push the control s
witch forward
or backward to move the seat to
the desired position. Release the
switch once the seat reaches the
desired position.
Seatback angle (2)
To recline the seatback:
䳜 Push the control s
witch forward
or backward to move the seat
-
back to the desired angle. Release
the switch once the seat reaches
the desired position.
Seat height (3)
To change the height of the seat:
䳜 Pull the front portion of the con
-
trol switch up to raise or press
down to lower the front part of
the seat cushion. Pull the rear
portion of the control switch up to
raise or press down to lower the
seat cushion. Release the switch
once the seat reaches the desired
position.
Lumbar support for driver's seat
(4) (if equipped)
The lumbar support can be adjusted
by pressing the lumbar support
switch on the side of the seat.
1. Press the front por
t
ion of the
switch to increase support, or the
rear portion of the switch, to
decrease support.
2. Release the switch once it
r
e
aches the desired position.
Driver position memory system for
power seat (if equipped)
A driver position memory system is
provided to store and recall the
driver seat and outside rearview
mirror position with a simple button
operation.
By saving the desir
e
d position into
the system memory, different driv
-
ers can reposition the driver seat
based upon their driving prefer
-
ence. If the battery is disconnected,
the desired seat position memory
will need to be re-saved.
To Next Page
Loading...
