Maintenance
628
Light bulbs
Replacing back-up lamp bulb
If the back-up lamp does not oper
-
ate, have the vehicle checked by an
authorized Kia dealer.
Replacing high mounted stop lamp
bulb
If the high mounted stop lamp (LED)
does not operate, have the vehicle
checked by an authorized Kia dealer.
The LED lamps cannot be replaced
as
a
single component because they
are part of an integrated unit. The
LED lamps have to be replaced with
the unit.
A skilled technician should check or
r
ep
air the high mounted stop lamp
(LED), for it may damage related
parts of the vehicle.
Replacing license plate lamp bulb
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the socket from the
asse
mb
ly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
3. Remove the bulb from bulb-
soc
k
et by pulling it out.
To Next Page
Loading...
Need help?
General
