What to do in an emergency
267
Towing
Using removable towing hook (if
equipped)
Front
Rear
1. Open the liftgate, and remove the
towing hook from the tool case.
2. Remove the hole cover pressing
the
upper (front) / lower (rear)
part of the cover on the bumper.
3. Install the towing hook
by turning
it clockwise into the hole until it is
fully secured.
4. Remove the towing hook and
in
sta
ll the cover after use.
Emergency towing
If towing service is not available in
an emergency, your vehicle may be
temporarily towed using a cable or
chain secured to the emergency
towing hook under the front (or
rear) of the vehicle.
Front
To Next Page
Loading...
Need help?
General
