71
6
6
Driving your vehicle Smart Cruise Control with Stop & Go System
Converting to Cruise Control mode
The driver may choose to only use
the cruise control mode (speed con
-
trol function) by doing as follows:
1. Turn the smart cruise control sys
-
tem on (the cruise indicator light
will be on but the system will not
be activated).
2. Push the distance to distance
switch for mor
e than 2 sec
onds.
3. Choose between "Smart Cruise
Co
ntrol" and "Cruise Control".
When the system is canceled using
the CRUISE button
or the CRUISE
button is used after the vehicle is
turned on, the Smart Cruise Control
mode will turn on.
When using the cruise control mode,
you must manually assess the dis
-
tance to other vehicles as the sys
-
tem will not automatically brake to
slow down for other vehicles.
Limitations of the Smart Cruise
Control
The smart cruise control system
may have limits to its ability to
detect distance to the vehicle ahead
due to road and traffic conditions.
Driving on a curve
On curves, the smart cruise control
system may not immediately detect
a moving vehicle in your lane, and
then your vehicle could accelerate to
the set speed. Also, the vehicle
speed will rapidly decrease when the
vehicle ahead is recognized sud
-
denly.
To Next Page
Loading...
