Driving your vehicle
626
Smart Cruise Control with Stop & Go System
Increasing Smart Cruise Control set
speed
Follow either of these procedures:
䳜 Move the lever up (to RES+), and
hold it. Y
our vehicle set speed will
increase by 5 mph (10 km/h).
Release the lever at the speed
you want.
䳜 Mov
e the lever up (to RES+), and
r
elease it immediately. The cruis
-
ing speed will increase by 1.0 mph
(1.0 km/h) each time you move
the lever up (to RES+) in this man
-
ner.
You can set the speed to a
maxi
-
mum speed of 100 mph (160 km/h).
However, all speed limit laws must
be followed.
Check the traffic and driving condi
-
tions before using the toggle switch.
Driving speed may sharply increase,
when you push up and hold the tog
-
gle switch.
Decreasing Smart Cruise Control
set speed
Follow either of these procedures:
䳜 Move the lever down (to SET-),
an
d hold it. Your vehicle set speed
will decrease by 5 mph (10 km/h).
Release the lever at the speed
you want.
䳜 Mov
e the lever down (to SET-),
a
nd release it immediately. The
cruising speed will decrease by 1.0
mph (1.0 km/h) each time you
move the lever down (to SET-) in
this manner.
You can set the cruise control speed
abov
e 20 mph (3
0 km/h).
Accelerating temporarily with
Smart Cruise Control on
䳜 If you want to speed up tempo
-
rarily when the cruise control is
on, depress the accelerator pedal.
Increased speed will not interfere
with cruise control operation or
change the set speed.
䳜 T
o return to the set speed, take
your foot off the accelerator
.
To Next Page
Loading...
