63
8
8
Maintenance Light bulbs
4. Insert a new bulb by inserting it
into the bulb-socket.
5. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
6. Push the socket into the assem
-
bly and turn the socket clockwise.
7. Align the lens cover tabs with the
lamp housing notches
and snap
the lens into place.
Replacing side repeater lamp (LED
type) bulb
If the side repeater lamp (LED) does
not operate, have the vehicle
checked by an authorized Kia dealer.
The LED lamps cannot be replaced
as
a
single component because they
are part of an integrated unit. The
LED lamps have to be replaced with
the unit.
A skilled technician should check or
r
e
pair the side repeater lamp (LED),
for it may damage related parts of
the vehicle.
Replacing map lamp (bulb type)
bulb
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the bulb by pulling it
stra
ig
ht out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap
th
e
lens into place.
Be careful not to dirty or damage
the lens, lens tab, and plastic hous
-
ings.
To Next Page
Loading...
