Driving your vehicle
666
Smart Cruise Control with Stop & Go System
䳜 The vehicle to vehicle distance will
automatically activate when the
smart cruise control system is on.
䳜 Se
lect the appropriate distance
a
ccording to road conditions and
vehicle speed.
䳜 Eac
h time the button is pressed,
the v
ehicle to vehicle distance
changes as follows:
For example, if you drive at 56
mph (90 km/h), the distance
mai
n
tain as follows;
Distance 4 - approximately 172 ft
(52.5 m)
Distance 3 - approximately 131 ft
(40 m)
Distance 2 - approximately 107 ft
(32.5 m)
Distance 1 - approximately 82 ft
(25 m)
The distance is set to the last set
distance when the system is used
for the first time after starting the
vehicle.
When the lane ahead is clear:
The vehicle speed will maintain the
set speed.
Following Distance
䳜 To avoid collisions, always be
aware of the selected speed and
vehicle to vehicle distance set
-
tings when activating your smart
cruise control system.
䳜 Always maintain sufficient brak
-
ing distance and decelerate your
vehicle by applying the brakes if
necessary.
To Next Page
Loading...
