Driving your vehicle
886
Rear Cross-Traffic Collision Warning (RCCW)
Driving where there is a structure
beside the road
[A]: noise barrier, [B]: guardrail
The BCW systems may not operate
proper
ly when driving where there
is structure beside the road.
In certain instances, the system
may wrongly
r
ecognize the struc
-
tures (i.e. noise barriers, guardrail,
double guardrail, median strip, bol
-
lard, street light, road sign, tunnel
wall, etc.) beside the road.
Always pay attention to road and
dr
ivi
ng conditions, while driving.
This device complies with Part 15
of the FCC rules.
Operation is subject to the following
two conditions:
1. This device may not cause harm
-
ful interference, and
2. This device must accept any
in
terference received, including
interference that may cause
undesired operation.
Rear Cross-Traffic Collision
Warning (RCCW) (if equipped)
This is a feature that is designed to
prevent collision or warns of the risk
of collision by detecting a vehicle
approaching from cross traffic using
radar sensors installed in the vehi
-
cle.
Rear Cross-Traffic Collision Warn
-
ing (RCCW) system
The Rear Cross-Traffic Collision
Warning (RCCW) system uses radar
sensors to monitor the approaching
cross traffic from the left and right
side of the vehicle when your vehicle
is in reverse.
The blind spot detec
t
ion range var
-
ies relative to the approaching vehi
-
cle speed.
Setting and activating the RCCW
The driver can activate the systems
by placing the POWER button to the
ON position and by selecting:
To Next Page
Loading...
Need help?
General
