Driving your vehicle
686
Smart Cruise Control with Stop & Go System
䳜 The warning chime sounds and
LCD display blinks if it is hard to
maintain the selected distance to
the vehicle ahead.
䳜 If the warning chime sounds,
actively adjust the vehicle speed
by depressing the brake pedal
according to the road and driving
conditions.
䳜 Ev
en if the warning chime is not
activated,
always pay attention to
the driving conditions to prevent
dangerous situations from occur
-
ring.
䳜 Be alert to road conditions as
radio, loud sounds and outsid
e
conditions could prevent occu
-
pants from hearing a warning
sound.
If the vehicle ahead (vehicle speed:
less than 20 mph (30 km/h) moves
to the next lane, the warning chime
will sound and a message will
appear. Adjust your vehicle speed
for vehicles or objects that can sud
-
denly appear in front of you by
depressing the brake pedal accord
-
ing to the road and driving condi
-
tions.
In traffic situation
Use switch or pedal to accelerate
䳜 In traffic, your vehicle will stop if
the
vehicle ahead of you stops.
Also, if the vehicle ahead of you
starts moving, your vehicle will
start as well. However, if the vehi
-
cle stops you must depress the
accelerator pedal or push up the
toggle switch (RES+) to start driv
-
ing.
䳜 If you push the smart cruise con
-
trol toggle switch (RES+ or SET-)
while Auto Hold and smart cruise
control is operating the Auto Hold
will be released regardless of
accelerator pedal operation and
the vehicle will start to move. The
AUTO HOLD indicator changes
from green to white. (if equipped
with EPB (Electronic Parking
Brake))
To Next Page
Loading...
