Features of your vehicle
104
Remote keyless entry
If you are unsure how to use or
replace the battery, contact an
authorized Kia dealer.
1. Detach mechanical key from your
smart key.
2. Pry open the remote keyless
entry cover.
3. Replace the smart key cover with
a new battery. (CR2032) When
replacing the battery, make sure
the battery position is correct.
4. Install the battery in the reverse
order of removal.
The remote keyless entry is
designed to give you years of trou
-
ble-free use, however it can mal
-
function if exposed to moisture or
static electricity. If you are unsure
how to use or replace the battery,
contact an authorized Kia dealer.
Using the wrong battery can cause
the remote keyless entry to mal
-
function. Be sure to use the correct
battery.
An inappropriately dis
-
posed battery can be
harmful to the environment and
human health. Dispose the battery
according to your local law(s) or
regulation.
Remote keyless entry damage
The remote keyless entry can mal
-
function if dropped, exposed to
moisture, static electricity, heat or
direct sunlight.
This device complies with Part 15
of the FCC rules.
Operation is subject to the following
two conditions:
1. This device may not cause harm
-
ful interference, and
2. This device must accept any
interference received, including
interference that may cause
undesired operation.
Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to operate
the equipment. If the smart key is
inoperative due to changes or modi
-
fications not expressly approved by
the party responsible for compli
-
ance, it will not be covered by your
manufacturer's vehicle warranty.