Features of your vehicle
304
Trunk
Easy access function (if equipped)
The system will move the driver's
seat automatically as follows:
Without smart key system
䳜 It will move the driver's seat rear
-
ward when the ignition key is
removed and the driver's door is
opened.
䳜 It will move the driver's seat for
-
ward when the ignition switch is
in the ACC or ON position.
With smart key system
䳜 It will move the driver's seat rear
-
ward when the ENGINE START/
STOP button is in the OFF position
and the driver's door is opened.
䳜 It will move the driver's seat for
-
ward when the vehicle is turned
ON or the driver's door is closed
with the smart key with you.
You can activate or deactivate the
Easy Access Function from the User
Settings Mode on the LCD display.
For more details, refer to "LCD dis
-
play" on page 4-83. If your vehicle is
equipped with additional navigation,
please refer to the infotainment
system manual separately supplied.
Upward/downward movement of
the seat may not work when pas
-
sengers get on/off the vehicle in
order to prevent foot injuries in cer
-
tain places.
Trunk
Opening the trunk
1. Make sure the vehicle is in P
(Park) and set the parking brake.
2. Hold down the trunk unlock but
-
ton located on your remote key or
smart key for more than 1 sec
-
ond.
Additionally, for vehicles equipped
with smart key:
䳜 While all doors are unlocked,
press the unlock button to open
trunk with or without the smart
key in your possession.
䳜 If any door is locked or all doors
are locked, the switch can still
be used to open the trunk, as
long as the smart key is in your
possession.
To Next Page
Loading...
