121
4
4
Features of your vehicle Lighting
Lighting control
The light switch has a headlight and
a position lamp position.
To operate the lights, turn the knob
at the end of the control lever to
one of the following positions:
1. OFF position
2. Auto light position (if equipped)
3. Position & Tail lamp
4. Headlight position
Position & Tail lamp
When the light switch is in the posi
-
tion lamp position, the front position
lamp and auxiliary lamp (if
equipped), tail, license light will turn
ON.
Auxiliary lamp will be ON only in
position lamp 「 」 condition.
Head light (Low Beam)
When the light switch is in the head
light position, head light (low beam),
tail, license light will turn ON.
The ENGINE START/STOP button
must be in the ON position to turn
on the headlights.