Driving your vehicle
505
Dual clutch transmission (DCT)
Shift lock system
For your safety, the Dual clutch
transmission has a shift lock system
which prevents shifting the trans
-
mission from P (Park) into R
(Reverse) unless the brake pedal is
depressed.
To shift the transmission from P
(Park) into R (Reverse):
1. Depress and hold the brake pedal.
2. Start the engine or turn the igni
-
tion switch to the ON position.
3. Move the shift lever.
If the brake pedal is repeatedly
depressed and released with the
shift lever in the P (Park) position, a
chattering noise & vibration near
the shift lever may be heard. This is
a normal condition.
Always fully depress the brake
pedal before and while shifting out
of the P (Park) position into another
position to avoid inadvertent motion
of the vehicle which could injure per
-
sons in or around the vehicle.
Shift-lock override
If the shift lever cannot be moved
from the P (Park) position into R
(Reverse) position with the brake
pedal depressed, continue depress
-
ing the brake, and then do the fol
-
lowing:
1. Place the ignition switch in the
LOCK/OFF position.
2. Apply the parking brake.
3. Carefully remove the cap cover
-
ing (1) the shift-lock release
access hole.
4. Insert a tool (e.g., flathead screw
-
driver) into the access hole and
press down on the tool.
5. Move the shift lever.
6. Remove the tool from the shift-
lock override access hole then
install the cap.
7. Have your vehicle inspected by an
authorized Kia dealer immedi
-
ately.