55
5
5
Driving your vehicle Idle Stop and Go (ISG) system
Deactivating the ISG
䳜 If you wish to deactivate the ISG,
press the ISG OFF button. The
light on the ISG OFF button will
illuminate.
䳜 If you press the ISG OFF button
again, the ISG will be activated
and the light on the ISG OFF but
-
ton will turn off.
ISG malfunction
The ISG may not operate when:
The ISG may not operate when an
ISG related sensor or system error
occurs.
The following will happen:
䳜 The yellow AUTO STOP 「 」
indicator on the instrument clus
-
ter will stay on after blinking for 5
seconds.
䳜 The light on the ISG OFF button
will illuminate.
When the engine is in Idle Stop
mode, it's possible to restart the
engine without the driver taking any
action. Before leaving the car or
doing anything in the engine com
-
partment, stop the engine by the
ENGINE START/STOP button to the
OFF position.
If the AGM battery is reconnected or
replaced, ISG function will not oper
-
ate immediately. If you want to use
the ISG function, the battery sensor
needs to be calibrated for approxi
-
mately 4 hours with the ignition off.
After calibration, turn the engine on
and off 2 or 3 times.
To Next Page
Loading...
