Features of your vehicle
1584
Interior features
䳜 The seat warmer defaults to the
OFF position whenever the igni
-
tion switch or ENGINE START/
STOP button is turned on.
Temperature control (Automatic)
The seat warmer starts to auto
-
matically control the seat tempera
-
ture in order to prevent low-
temperature burns after being
manually turned ON.
You may manually press the button
to increase the seat temperature.
However, it soon returns to the
automatic mode again.
䳜 When pressing the levers/switch
for more than 1.5 seconds with
the seat warmer operating, the
seat warmer will turn OFF.
䳜 The seat warmer defaults to the
OFF position whenever the
ENGINE START/STOP button is in
the ON position.
With the seat warmer levers/switch
in the ON position, the heating sys
-
tem in the seat turns off or on
automatically depending on the seat
temperature.
䳜 When cleaning the seats, do not
use an organic solvent such as
paint thinner, benzene, alcohol
and gasoline. Doing so may dam
-
age the surface of the heater or
seats.
䳜 To prevent overheating the seat
warmer, do not place anything on
the seats that insulates against
heat, such as blankets, cushions
or seat covers while the seat
warmer is in operation.
䳜 Do not place heavy or sharp
objects on seats equipped with
seat warmers. Damage to the
seat warming components could
occur.
䳜 Do not change the seat cover. It
may damage the seat warmer or
air ventilation system.
Seat warmer burns
Passengers should use extreme
caution when using seat warmers
due to the possibility of excess
heating or burns. The seat warmer
may cause burns even at low tem
-
peratures, especially if used for long
periods of time. In particular, the
driver must exercise extreme care
for the following types of passen
-
gers: