69
7
7
Maintenance Light bulbs
3. Using a flat-blade screwdriver,
gently pry the lamp assembly
from interior.
4. Remove the bulb by pulling it
straight out.
5. Install a new bulb in the socket.
6. Install the lamp assembly to inte
-
rior.
Be careful not to dirty or damage
the lens, lens tab, and plastic hous
-
ings.
Replacing room lamp bulb (Bulb
type)
Interior lamps
Prior to working on the Interior
lamps, ensure that the "OFF" button
is depressed to avoid burning your
fingers or receiving an electric
shock.
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap
the lens into place.
Be careful not to dirty or damage
the lens, lens tab, and plastic hous
-
ings.
Replacing room lamp bulb (LED
type)
If the Room lamp (LED) (1) does not
operate, have the vehicle checked by
an authorized Kia dealer.
The LED lamps cannot be replaced
as a single component because they
are part of an integrated unit. The
LED lamps have to be replaced with
the unit.
To Next Page
Loading...
Need help?
General
