159
5
5
Driving your vehicle Rear Cross-Traffic Collision-Avoidance Assist
(RCCA)
Warning Timing
With the ENGINE START/STOP
button in the ON position, select
'Driver Assistance → Warning Tim
-
ing' from the Settings menu to
change the initial warning activa
-
tion time for Rear Cross-Traffic
Safety system.
When the vehicle is first delivered,
Warning Timing is set to 'Normal'.
If you change the Warning Timing,
the warning time of other Driver
Assistance systems may change.
Warning Volume
With the ENGINE START/STOP
button in the ON position, select
'Driver Assistance → Warning Vol
-
ume' from the Settings menu to
change the Warning Volume to
'High', 'Medium' or 'Low' for Rear
Cross-Traffic Safety system.
If you change the Warning Volume,
the Warning Volume of other Driver
Assistance systems may change.
䳜 The setting of the Warning Timing
and Warning Volume applies to all
functions of the Rear Collision-
Avoidance Assist.
䳜 Even though 'Normal' is selected
for Warning Timing, if the vehicles
from the left and right side
approaches at high speed, the ini
-
tial warning activation time may
seem late.
䳜 Select 'Late' for Warning Timing
when traffic is light and when
driving speed is slow.
System Operation
System warning and control
Rear Cross-Traffic Safety system
will warn and control the vehicle
depending on collision level: 'Collision
Warning', 'Emergency Braking' and
'Stopping vehicle and ending brake
control'.
Collision Warning
To Next Page
Loading...
Need help?
General
