Features of your vehicle
1504
Windshield defrosting and defogging
Defrosting outside windshield with
automatic climate control
1. Set the fan speed to the highest
position.
2. Set the temperature to the
extreme hot (HI) position.
3. Press the defroster button
「」.
4. The outside (fresh) air position
will be selected automatically and
the air conditioning will turn on
according to the detected ambi
-
ent temperature.
Auto defogging system (only for
automatic climate control system)
(if equipped)
Auto defogging helps reduce the
possibility of fogging up the inside
of the windshield by automatically
sensing the moisture on inside the
windshield.
The auto defogging system
operates when the heater or
air conditioning is on.
When the Auto Defogging System
operates, the indicator will illumi
-
nate.
If a high amount of humidity is
detected in the vehicle, the Auto
Defogging System will be enabled.
The following steps will be per
-
formed automatically:
1. The A/C button will turn ON.
2. The air intake control will change
to Fresh mode under low outside
temperature.
3. The mode will be changed to
defrost to direct airflow to the
windshield.
4. The fan speed will be increased.
To cancel or reset the Auto Defog
-
ging System
Press the front windshield defroster
button for 3 seconds when the igni
-
tion switch or ENGINE START/STOP
button is in the ON position.
To Next Page
Loading...
Need help?
General
