Driving your vehicle
1085
Safe Exit Assist (SEA)
Warning Timing
With the ENGINE START/STOP
button in the ON position, select
'Driver Assistance → Warning Tim
-
ing' from the Settings menu to
change the initial warning activa
-
tion time for Blind-Spot Safety sys
-
tem.
When the vehicle is first delivered,
Warning Timing is set to 'Normal.
If you change the Warning Timing,
the warning time of other Driver
Assistance systems may change.
Warning Volume
With the ENGINE START/STOP
button in the ON position, select
'Driver Assistance → Warning Vol
-
ume' from the Settings menu to
change the Warning Volume 'High',
'Medium', 'Low' or 'Off' for Blind-
Spot Safety system.
However, even if 'Off' is selected,
the system's Warning Volume will
not turn off but the volume will
sound as 'Low'.
If you change the Warning Volume,
the Warning Volume of other Driver
Assistance systems may change.
䳜 The setting of the Warning Timing
and Warning Volume applies to all
functions of the Safe Exit Assist.
䳜 Even though 'Normal' is selected
for Warning Timing, if the vehicles
approaches at high speed from
the rear, the initial warning acti
-
vation time may seem late.
䳜 Select 'Late' for Warning Timing
when traffic is light and when
driving speed is slow.
System Operation
Warning and control
Collision warning when exiting vehi
-
cle
䳜 When an approaching vehicle
from the rear is detected at the
moment a door is opened, the
'Watch for traffic' warning mes
-
sage will appear on the cluster,
and an audible warning will sound.
䳜 Safe Exit Assist will warn the
driver when your vehicle speed is
below 2 mph (3 km/h), and the
speed of the approaching vehicle
To Next Page
Loading...
Need help?
General
