Features of your vehicle
1484
Windshield defrosting and defogging
Turning off the front air climate
control
䳜 Press the OFF button to turn off
the air climate control system.
However, you can still operate the
mode and air intake buttons as
long as the ENGINE START/STOP
button is in the ON position.
Clean air (if equipped)
When the ignition switch or ENGINE
START/STOP button is in the ON
position, the clean air function turns
on automatically.
Also, the clean air function turns off
automatically, when the ignition
switch or ENGINE START/STOP
button is in the OFF position.
Windshield defrosting and
defogging
When the windshield is covered with
frost or moisture, the front view is
blurred, so you should remove the
frost and moisture.
Windshield heating
Do not use the 「 」 or 「 」
position during cooling operation in
extremely humid weather. The dif
-
ference between the temperature
of the outside air and the windshield
could cause the outer surface of the
windshield to fog up, causing loss of
visibility. In this case, set the mode
selection to the 「 」 position
and fan speed control to the lower
speed.
䳜 For maximum defrosting, set the
temperature control to the
extreme right/hot position and
the fan speed control to the high
-
est speed.
䳜 If warm air to the floor is desired
while defrosting or defogging, set
the mode to the floor-defrost
position.
䳜 Before driving, clear all snow and
ice from the windshield, rear win
-
dow, outside rear view mirrors,
and all side windows.
To Next Page
Loading...
Need help?
General
