11
3
3
Safety features of your vehicle Seat
Changing seat cushion tilt and
height
To change the tilt and height of the
seat:
1. Pull the front portion (1) of the
control switch up to raise or press
down to lower the front part of
the seat cushion.
2. Pull the rear portion (2) of the
control switch up to raise or press
down to lower the back part of
the seat cushion.
3. Release the switch once the seat
reaches the desired position.
Adjusting lumbar support for
driver's seat (if equipped)
The lumbar support can be adjusted
by pressing the lumbar support
switch on the side of the seat.
1. Press the front portion of the
switch to increase support, or the
rear portion of the switch, to
decrease support.
2. Release the switch once it
reaches the desired position.
Headrest for front seat
The driver's and front passenger's
seats are equipped with a headrest
for the occupant's safety and com
-
fort.
To Next Page
Loading...
Need help?
General
