119
4
4
Features of your vehicle Lighting
- Wireless transmitters or mobile
phones present near the sen
-
sor.
- Installing the license plate dif
-
ferently from the original loca
-
tion
- Accessories, such as license
plate molding or sticker, are
installed on the sensor area.
- The vehicle bumper height or
sensor installation has been
modified.
䳜 The following objects may not be
recognized by the sensor:
- Sharp or slim objects such as
ropes, chains or small poles.
- Undetectable objects smaller
than 40 in (100 cm) and nar
-
rower than 5.5 in (14 cm) in
diameter.
- Objects, which tend to absorb
sensor frequency such as
clothes, spongy material or
snow.
䳜 If it does not work properly, have
your vehicle inspected by an
authorized Kia dealer.
Lighting
This vehicle is equipped with a vari
-
ety of lights to illuminate the inte
-
rior and exterior of the vehicle.
To prevent the battery from being
discharged, do not leave the head
-
light and interior light on for a pro
-
longed time while the engine is not
running.
Battery saver function
The purpose of this feature is to
prevent the battery from being dis
-
charged if the lights are left in the
ON position. The system automati
-
cally shuts off the position lamp 30
seconds after the vehicle is turned
off and the driver's door is opened
and closed.
With this feature, the position lamp
will turn off automatically if the
driver parks on the side of the road
at night and opens the driver's side
door.
If necessary, to keep the position
lamp on when the vehicle is turned
off, perform the following:
1. Open the driver-side door.
2. Turn the position lamp OFF and
ON again using the light switch on
the steering column.
To Next Page
Loading...
Need help?
General
