Features of your vehicle
424
Hood
Hood
The hood serves as a cover for the
engine compartment.
Open the hood if maintenance
works needs to be performed in the
engine compartment or if you need
to look at the compartment.
Opening the hood
1. Pull the release lever to unlatch
the hood. The hood should pop
open slightly.
2. Go to the front of the vehicle,
raise the hood slightly, push the
secondary latch (1) up side and lift
the hood (2).
3. Pull out the support rod.
4. Hold the hood opened with the
support rod.
Hood open warning
The hood warning message will
appear on the LCD display when
hood is open.
The warning chime will operate
when the vehicle is being driven at
or above 2 mph (3 km/h) with the
hood open.
Closing the hood
1. Before closing the hood, check the
following:
䳜 All filler caps in the engine com
-
partment must be correctly
installed.
䳜 Gloves, rags or any other com
-
bustible material must be
removed from the engine com
-
partment.
2. Lower the hood until it is about 30
cm above the closed position and
let it drop. Make sure that it locks
into place.
To Next Page
Loading...
