127
5
5
Driving your vehicle Smart Cruise Control (SCC)
䳜 For more details on Drive Mode,
refer to "Drive mode integrated
control system" on page 5-56.
䳜 For the vehicle without the Drive
Mode or Active Eco, acceleration
of the Smart Cruise Control is set
to 'Normal'.
Warning Volume
With the ENGINE START/STOP
button in the ON position, select
'Driver Assistance → Warning Vol
-
ume' from the Settings menu to
change the Warning Volume 'High',
'Medium' or 'Low' for Smart Cruise
Control.
If you change the Warning Volume,
the Warning Volume of other Driver
Assistance systems may change.
If the engine is restarted, Warning
Volume will maintain the last set
-
ting.
System operation
Operating conditions
Smart Cruise Control will operate
when the following conditions are
satisfied.
Basic function
䳜 The gear is in D (Drive)
䳜 The driver's door is closed
䳜 EPB (Electronic Parking Brake) is
not applied
䳜 Your vehicle speed is within the
operating speed range
- 5~110 mph (10~180 km/h):
when there is no vehicle in front
- 0~110 mph (0~180 km/h): when
there is a vehicle in front
䳜 ESC (Electronic Stability Control),
TCS (Traction Control System) or
ABS is on, but not controlling the
vehicle
䳜 Engine rpm is not in the red zone
䳜 Forward Collision-Avoidance
Assist brake control is not operat
-
ing
䳜 Remote Smart Parking Assist
brake control is not operating
䳜 ISG system is not operating
When your vehicle is stopped with a
vehicle in front of you, the system
will turn on if the brake pedal is
depressed.
Overtaking Acceleration Assist
Overtaking Acceleration Assist will
operate when the left turn signal
indicator is turned on while Smart
Cruise Control is operating, and the
following conditions are satisfied:
To Next Page
Loading...
