Features of your vehicle
1244
Lighting
You can activate or deactivate the
One Touch Turn Signal function or
choose the number of blinking (3, 5,
or 7) by selecting "User Settings →
Lights → One Touch Turn signal".
If the turn signal indicator stays on
and does not flash, or if it flashes
abnormally, a bulb may be burned
out or have a poor electrical connec
-
tion in the circuit. The bulb may
require replacement.
Operating front fog light (if
equipped)
Fog lights are designed to provide
improved visibility when visibility is
poor due to fog, rain or snow, etc.
The fog lights will turn on when the
fog light switch (1) is turned to the
on position after the headlight is
turned on.
To turn off the fog lights:
䳜 Turn the fog light switch (1) to
the ON position.
When in operation, the fog lights
consume large amounts of vehicle
electrical power. Only use the fog
lights when visibility is poor.
High Beam Assist (HBA) (if
equipped)
High Beam Assist is a system that
automatically adjusts the headlamp
range (switches between high beam
and low beam) depending on the
brightness of detected vehicles and
certain road conditions.
To Next Page
Loading...
