Driving your vehicle
1285
Smart Cruise Control (SCC)
䳜 Your vehicle speed is above 40
mph (60 km/h)
䳜 The hazard warning flasher is off
䳜 A vehicle is detected in front of
your vehicle
䳜 Deceleration is not needed to
maintain distance with the vehicle
in front
䳜 When the left turn signal indicator
is turned on while there is a vehi
-
cle ahead, the vehicle may accel
-
erate temporarily. Pay attention
to the road conditions at all times.
䳜 Regardless of your countries driv
-
ing direction, Overtaking Accelera
-
tion Assist will operate when the
conditions are satisfied. When
using the function in countries
with different driving direction,
always check the road conditions
at all times.
System Display and Control
Basic function
Smart Cruise Control will be dis
-
played as below depending on the
status of the system.
You can see the status of the Smart
Cruise Control operation in the Driv
-
ing Assist view on the cluster. Refer
to "LCD display" on page 4-83.
䳜 When operating
Operating
1. Whether there is a vehicle
ahead and the selected dis
-
tance level are displayed.
2. Set speed is displayed.
3. Whether there is a vehicle
ahead and the selected target
distance are displayed.
䳜 When temporarily canceled
Temporarily canceled
1. 「 」 indicator is dis
-
played.
2. The previous set speed is
shaded.
3. Vehicle ahead and distance level
are not displayed.
To Next Page
Loading...
Need help?
General
