67
7
7
Maintenance Light bulbs
Replacing tail lamp, tail & stop
lamp, rear side marker bulb (LED
type)
If the tail lamp (1), tail & stop lamp
(2) and side marker lamp (3) does
not operate, have the vehicle
checked by an authorized Kia dealer.
Replacing high mounted stop lamp
bulb (LED type)
If the high mounted stop lamp (1)
does not operate, have the vehicle
checked by an authorized Kia dealer.
Replacing license plate lamp bulb
(Bulb type)
To replace the bulb:
1. Engage the parking brake, shift to
P and turn the ignition OFF.
2. Turn of the lamp.
3. Using a screwdriver, gently pry
the lamp assembly.
4. Remove the bulb by pulling it
straight out.
5. Install a new bulb in the socket.
6. Install the lamp assembly to inte
-
rior.
Replacing map lamp bulb (Bulb/LED
type)
Bulb type
To Next Page
Loading...
Need help?
General
