Maintenance
687
Light bulbs
LED type
Interior lamps
Prior to working on the Interior
lamps, ensure that the "OFF" button
is depressed to avoid burning your
fingers or receiving an electric
shock.
1. Using a flat-blade screwdriver,
gently pry the lens cover from
lamp housing.
2. Remove the bulb by pulling it
straight out.
3. Install a new bulb in the socket.
4. Align the lens cover tabs with the
lamp housing notches and snap
the lens into place.
If the map lamp bulb/LED (1) does
not operate, have the vehicle
checked by an authorized Kia dealer.
The LED lamp cannot be replaced as
a single unit because it is an inte
-
grated unit. The LED lamp has to be
replaced with the unit.
A skilled technician should check or
repair the map lamp (LED), for it
may damage related parts of the
vehicle.
Be careful not to dirty or damage
the lens, lens tab, and plastic hous
-
ings.
Replacing vanity mirror lamp bulb
(Bulb type) (if equipped)
Interior lamps
Prior to working on the Interior
lamps, ensure that the "OFF" button
is depressed to avoid burning your
fingers or receiving an electric
shock.
To replace the bulb:
1. Engage the parking brake, shift to
P and turn the ignition OFF.
2. Turn of the lamp.
To Next Page
Loading...
