Features of your vehicle
1224
Lighting
Auto light (if equipped)
When the light switch is in the AUTO
light position, the taillights and
headlights will turn ON or OFF auto
-
matically depending on the amount
of light outside the vehicle.
䳜 Never place anything over the
sensor (1) located on the instru
-
ment panel as this will ensure
better auto-light system control.
䳜 Don't clean the sensor using a
window cleaner, the cleaner may
leave a light film which could
interfere with sensor operation.
䳜 If your vehicle has window tint or
other types of metallic coating on
the front windshield, the Auto
light system may not work prop
-
erly.
Operating high beam
To turn on the high beam headlight:
䳜 Push the lever away from you.
The lever will return to its original
position.
The high beam indicator will light
when the headlight high beams
are switched on.
High beams
Do not use high beam when there
are other vehicles in front of or
approaching your vehicle. Using high
beam could obstruct the other
driver's vision.
To Next Page
Loading...
