Kia K5 2021 - Page 215

125
4
4
Features of your vehicle Lighting
Detecting sensor
Front view camera
The front view camera is used as a
detecting sensor to detect ambient
light and brightness while driving.
Refer to the picture above for the
detailed location of the detecting
sensor.
NOTICE
䳜 Always keep the front view cam -
era in good condition to maintain
optimal performance of High
Beam Assist.
䳜 For more details on the precau
-
tions of the front view camera,
refer to "Forward Collision䳍Avoid
-
ance Assist (FCA) - front view
camera only (if equipped)" on
page 5-60
System setting
With the ENGINE START/STOP
button in the ON position, select
'Lights → High Beam Assist' from
the Settings menu to turn on High
Beam Assist and deselect to turn
off the system.
WARNING
For your safety, change the Set -
tings after parking the vehicle at a
safe location.
System operation
Display and control
䳜 After selecting 'High Beam Assist'
in the Settings menu, High Beam
Assist will operate by following
the procedure below.
- Place the headlamp switch in
the AUTO position and push the
headlamp lever towards the
instrument cluster. The High
Beam Assist 「 」 indicator
light will illuminate on the clus
-
ter and the system will be
enabled.
- When the system is enabled,
high beam will turn on when
vehicle speed is above 25 mph
(40 km/h). When vehicle speed
is below 15 mph (25 km/h), high
beam will not turn on.
ODL3A050205