39
4
4
Features of your vehicle Windows
Window opening and closing
You can open and close windows
using the power window switch.
Type A
To open or close a window, press
down or pull up the front portion of
the corresponding switch to the
first detent position (5).
Type B - Auto up/down window (if
equipped)
Pressing or pulling up the power
window switch momentarily to the
second detent position (6) com
-
pletely lowers or raises the window
even when the switch is released. To
stop the window at the desired
position while the window is in oper
-
ation, pull up or press down and
release the switch.
To reset the power windows
If the power window does not oper
-
ate normally, the automatic power
window system must be reset as
follows:
1. Turn the ignition switch or ENGINE
START/STOP button to the ON
position.
2. Close the window and continue
pulling up the power window
switch for at least 1 second after
the window is completely closed.
Automatic reversal (if equipped)
If the upward movement of the
window is blocked by an object or
part of the body, the window will
detect the resistance and will stop
upward movement. The window will
then lower approximately 11.8 in
To Next Page
Loading...
