EasyManua.ls Logo

Kia K5 2021 - Page 155

Kia K5 2021
593 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
65
4
4
Features of your vehicle Mirrors
button, reference the device's
owner's manual.
3. Press and release the "Learn"
button.
4. A light on your garage door
opener may flash, and your Two-
Way Communication indicators
(4), (6) in your vehicle may flash,
confirming completion of the pro
-
cess.
5. Return to the vehicle and firmly
press and release the pro
-
grammed HomeLink button to
activate your garage door. The
Two-Way Communication indica
-
tors (4), (6) flash in orange when
the door is moving. Do not make
any additional button presses
until AFTER the garage door has
come to a complete stop.
6. Your Two-Way Communication
programming is now complete.
NOTICE
If your garage door opener has
Two-Way Communication function
-
ality, it is possible for HomeLink to
stop functioning the garage door
shortly after initial programming, IF
the Two-Way Communication Pro
-
gramming wasn't properly com
-
pleted. This usually happens after
the first 10 times a programmed
HomeLink button is pressed. If you
experience this, completing the
"Programming a New HomeLink
Button" and "Two-Way Communica
-
tion Programming" will restore door
operation.
4) Canadian Programming
Canadian radio-frequency laws
require transmitter remote signals
to "time-out" (or quit) after a couple
seconds of transmission, which may
not be long enough for HomeLink to
pick up the signal during program
-
ming.
If you live in Canada or you are hav
-
ing difficulties programming a gate
operator or garage door opener by
using the programming procedures,
replace "Programming a New
HomeLink Button" step 3 with the
following:
While the HomeLink indicator light
(7) is flashing orange, press and
release ("cycle") your device's hand-
held remote every two seconds until
the HomeLink indicator light (7)
changes from orange to green. You
may now release the hand-held
remote button. Then proceed with
"Programming a New HomeLink
Button" step 4.
2. Operating HomeLink󳚙
1) Operating HomeLink󳚙
1. Press and release the desired
programmed HomeLink button (1,
2 or 3).

Table of Contents

Other manuals for Kia K5 2021

Related product manuals