Driving your vehicle
145
ENGINE START/STOP button
If the engine stalls while the vehicle
is in motion, do not attempt to
move the shift lever to the P (Park)
position. If the traffic and road con
-
ditions permit, you may put the
shift lever in the N (Neutral) position
while the vehicle is still moving and
press the ENGINE START/STOP
button in an attempt to restart the
engine.
䳜 If the battery is weak or the
smart key does not work cor
-
rectly, you can start the engine by
pressing the ENGINE START/STOP
button with the smart key.
When you press the ENGINE
START/STOP button directly with
the smart key, the smart key
should contact the button at a
right angle.
䳜 When the stop lamp fuse is blown,
you cannot start the engine nor
-
mally.
Replace the fuse with a new one.
If it is not possible, you can start
the engine by pressing the
ENGINE START/STOP button for
10 seconds while it is in the ACC
position. The engine can start
without pressing the brake pedal.
But for your safety, always press
the brake pedal before starting
the engine.
Do not press the ENGINE START/
STOP button for more than 10 sec
-
onds, except when the stop lamp
fuse is blown.
To Next Page
Loading...
Need help?
General
