23
5
5
Driving your vehicle Brake system
Before the AUTO HOLD will
engage, the driver's door and
engine hood must be closed.
When coming to a complete stop by
pressing the brake pedal, the AUTO
HOLD indicator changes from white
to green indicating the AUTO HOLD
is engaged. The vehicle will remain
at a standstill even if you release
the brake pedal.
If EPB is applied, AUTO HOLD will be
released.
If you press the accelerator pedal
with the shift lever in D (Drive) or
Manual mode, the AUTO HOLD will
be released automatically and the
vehicle will start to move. The indi
-
cator changes from green to white
indicating the AUTO HOLD is in
standby and the EPB is released.
When driving off from AUTO HOLD
by pressing the accelerator pedal,
always check the surrounding area
near your vehicle.
Slowly press the accelerator pedal
for a smooth launch.
Canceling AUTO HOLD function
䳜 To cancel the AUTO HOLD opera
-
tion, press the AUTO HOLD switch.
The AUTO HOLD indicator will go
out.
䳜 To cancel the AUTO HOLD opera
-
tion when the vehicle is at a
standstill, press the AUTO HOLD
switch while pressing the brake
pedal.
䳜 The following are conditions when
the AUTO HOLD will not engage
(AUTO HOLD light will not turn
To Next Page
Loading...
