Driving your vehicle
745
Forward Collision䳍Avoidance Assist (FCA) -
sensor fusion
Junction Turning function will help
avoid a collision with an oncoming
vehicle in an adjacent lane when
turning left at a crossroad with the
turn signal on by applying emer
-
gency braking.
Detecting sensor
Front view camera
Front radar
Refer to the picture above for the
detailed location of the detecting
sensors.
Take the following precautions to
maintain optimal performance of
the detecting sensor:
䳜 Never disassemble the detecting
sensor or sensor assembly, or
apply any impact on it.
䳜 Never install any accessories or
stickers on the front windshield,
or tint the front windshield.
䳜 If the detecting sensors have
been replaced or repaired, have
your vehicle inspected by an
authorized Kia dealer/service
partner.
䳜 Pay extreme caution to keep the
front view camera dry.
䳜 Never place any reflective objects
(i.e. white paper, mirror) over the
dashboard. Any light reflection
may prevent the system from
functioning properly.
䳜 Do not apply license plate frame
or objects, such as a bumper
sticker, film or a bumper guard,
near the front radar cover.
䳜 Always keep the front radar and
cover clean and free of dirt and
debris. Use only a soft cloth to
wash the vehicle. Do not spray
pressurized water directly on the
sensor or sensor cover.
䳜 If unnecessary force has been
applied to the radar or around the
radar, Forward Collision-Avoid
-
ance Assist may not properly
operate even though a warning
To Next Page
Loading...
