Kia K5 2021 - Page 360

Driving your vehicle
985
Blind-Spot Collision-Avoidance Assist (BCA)
In addition, if the engine is turned
on, when the system is set to
'Active Assist' or 'Warning Only', the
warning light on the side view mir
-
ror will blink for approximately 3
seconds.
WARNING
䳜 'If 'Warning Only' is selected,
braking is not assisted.
䳜 If 'Off' is selected, the driver
should always be aware of the
surroundings and drive safely.
NOTICE
If the engine is restarted, Blind-Spot
Safety system will maintain the last
setting.
Warning Timing
With the ENGINE START/STOP
button in the ON position, select
'Driver Assistance → Warning Tim
-
ing' from the Settings menu to
change the initial warning activa
-
tion time for Blind-Spot Safety sys -
tem.
When the vehicle is first delivered,
Warning Timing is set to 'Normal. If
you change the Warning Timing, the
warning time of other Driver Assis
-
tance systems may change.
Warning Volume
With the ENGINE START/STOP
button in the ON position, select
'Driver Assistance → Warning Vol
-
ume' from the Settings menu to
change the Warning Volume to
'High', 'Medium', 'Low' or 'Off' for
Blind-Spot Safety system.
However, when Warning Volume is
turned off, the steering wheel
vibration function will turn on if it
was turned off.
If you change the Warning Volume,
the warning volume of other Driver
Assistance systems may change.
CAUTION
䳜 The setting of the Warning Timing
and Warning Volume applies to all
functions of the Blind-Spot
Safety system.
䳜 Even though 'Normal' is selected
for Warning Timing, if the vehicles
approaches at high speed, the ini
-
tial warning activation time may
seem late.
䳜 Select 'Late' for Warning Timing
when traffic is light and when
driving speed is slow.