Safety features of your vehicle
223
Seat belts
a sudden stop or impact, however,
the belt will lock into position. It will
also lock if you try to lean forward
too quickly.
If you are not able to pull out the
seat belt from the retractor, firmly
pull the belt out and release it. Then
you will be able to pull the belt out
smoothly.
Releasing the seat belt:
䳜 Press the release button (1) in the
locking buckle.
When it is released, the belt should
automatically draw back into the
retractor.
If this does not happen, check the
belt to be sure it is not twisted, then
try again.
Adjusting the height of shoulder
belt
You can adjust the height of the
shoulder belt anchor to one of the 4
positions for maximum comfort and
safety.
The height of the adjusting seat belt
should not be too close to your neck.
The shoulder portion should be
adjusted so that it lies across your
chest and midway over your shoul
-
der near the door and not your neck.
To adjust the height of the seat belt
anchor, lower or raise the height
adjuster into an appropriate posi
-
tion.
䳜 To raise the height adjuster, pull it
up (1).
䳜 To lower it, push it down (3) while
pressing the height adjuster but
-
ton (2).
Release the button to lock the
anchor into position. Try sliding the
height adjuster to make sure that it
has locked into position.
To Next Page
Loading...
Need help?
General
