27
7
7
Maintenance Climate control air filter
3. Push in both sides of the glove
box as shown. This will ensure
that the glove box stopper pins
will get released from its holding
location allowing the glove box to
hang.
4. Remove the climate control air fil
-
ter cover by pulling out right side
of the cover.
5. Replace the climate control air fil
-
ter.
6. Reassemble in the reverse order
of disassembly.
When replacing the climate control
air filter install it properly. Other
-
wise, the system may produce noise
and the effectiveness of the filter
may be reduced.
To Next Page
Loading...
