33
3
3
Safety features of your vehicle Child Restraint System (CRS)
CRS types
There are three main types of the
CRS: rear-facing seats, forward-
facing seats, and booster seats.
They are classified according to the
child's age, height and weight.
Backward-facing child seats
A rear-facing child seat provides
restraint with the seating surface
against the back of the child. The
harness system holds the child in
place, and in an accident, acts to
keep the child positioned in the seat
and reduces the stress to the neck
and spinal cord.
All children under age one must
always ride in a rear-facing infant
child restraint.
Convertible and 3-in-1 child seats
typically have higher height and
weight limits for the rear-facing
position, allowing you to keep your
child rear-facing for a longer period
of time.
Continue to use a rear-facing child
seat for as long as your child will fit
within the height and weight limits
allowed by the child seat manufac
-
turer. It's the best way to keep
them safe. Once your child has out
-
grown the rear-facing child
restraint, your child is ready for a
forward-facing child restraint with a
harness.
Forward-facing child restraints
A forward-facing child seat provides
restraint for the child's body with a
harness. Keep children in a forward-
facing child seat with a harness until
they reach the top height or weight
limit allowed by your child
restraint's manufacturer.
Once your child outgrows the for
-
ward-facing child restraint, your
child is ready for a booster seat.
Booster seats
A booster seat is a restraint
designed to improve the fit of the
vehicle's seat belt system. A booster
seat positions the seat belt so that
it fits properly over the lap of your
child.
Keep your child in a booster seat
until they are big enough to sit in
To Next Page
Loading...
Need help?
General
