Kidde FX-64 - Device Type Descriptions

Chapter 2: Front panel programming
P/N 3102352-EN • REV 005 • ISS 28DEC18 47
Event
CID
Net rcvr4 conf fault
(trouble) 354
Net rcvr5 conf fault (disable)
500
Net rcvr5 conf fault (trouble)
354
Net rcvr6 conf fault (disable)
500
Net rcvr6 conf fault (trouble
354
Net rcvr7 conf fault (disable)
500
Net rcvr7 conf fault (trouble)
354
Net rcvr8 conf fault
(disable) 500
Net rcvr8 conf fault (trouble)
354
Outputs are latched
140
Panel silence
315
Printer trouble
336
Program mode
627
Pull active
115
Reset
305
Reset/Silence inhibit
000
Self test fault
307
Signal silence
328
Event
CID
Smoke active
111
Smoke/Heat active
111
Supervisory active
200
System startup
000
System AC power (disable)
500
System AC power (trouble)
301
Test fire
604
Time
625
Walk test
607
Waterflow active
113
Zone active
110
Zone trouble
373
Zone disable
570
Zone pre
alarm 118
Zone alarm verify
118
Zone maintenance alert
393
Zone test
614
Device type descriptions
Device types determine the operation of the points to which they are assigned. The following
tables contain all possible device types. Available device types depend on the device and on
the marketplace selected for the panel. Some device types are unavailable in some
marketplaces. For this reason, the LCD listing for the selected device may differ from this
table.
Some single address detectors have primary and secondary elements.
Table 11: Detectors with primary and secondary elements
Detector
Primary element Secondary element
PCD
Smoke CO
HCD
Heat CO
PHCD
Smoke/Heat CO