P/N 3102352-EN • REV 005 • ISS 28DEC18 33
Chapter 2
Front panel programming
Summary
This chapter shows how to configure the system using the control buttons on the front panel.
For information on programming the system using the optional Configuration Utility (CU), refer
to the Help available in the CU.
The panel user interface is the primary interface of the fire alarm system.
Content
UL/ULC programming requirements 34
Getting started 36
What is a zone? 36
What is a correlation group? 36
What is in-suite signal silence? 38
Programming modes 39
Using the programming control buttons 40
Passwords 40
Factory default settings 41
Device type descriptions 47
Displaying the Program menu 56
Setting the time and date 57
Setting daylight saving time 57
Sample values for daylight saving time 58
Changing the passwords 58
Restoring the factory default settings 59
Setting up the programmable keys 60
Clearing the event history log 63
Updating the firmware 63
Restarting the panel 64
Enabling RS-232 communication 64
Auto programming the panel 65
Auto programming options 65
To Next Page
Loading...
Need help?
General
