Kidde FX-64 - Event Printout Examples

Chapter 3: System operation
P/N 3102352-EN • REV 005 • ISS 28DEC18 135
Event type
LCD Printer [1]
Monitor type reporting
CO monitor Gas CO active COMO ACT
Zone monitor Monitor MON ACT
Input monitor Monitor MON ACT
Outputs are latched Outputs are latched Outputs are latched
Prealarm reporting Prealarm PALM ACT
Alarm verify reporting Alarm verify ALMV ACT
Maintenance alert reporting Maint. alert MANT ACT
Trouble
All devices Trouble TRBL ACT
Disable
All devices Disable DSBL ACT
Test
All devices Test TEST ACT
[1] See “Event printout examples” below for an example of how events appear when printed.
Event printout examples
Event information is printed each time an event takes place provided a printer is connected to
the system. The following is an example of what the event information looks like on the printout
and a description of each piece of information printed for an event.
Annunciator event
TRBL ACT | 18:00:07 01/01/2007 A:008
Annunciator 08
Where:
TRBL ACT = Trouble event
18:00:07 01/01/2007 = Time and date the event took place
A:008 = Annunciator 08
Annunciator 08 = Label (could be the default label or a custom label)
Internal event (panel or loop event)
MON ACT | 18:00:18 01/01/2007 E:010
Loop 2 Initializing
Where:
MON ACT = Monitor event
18:00:18 01/01/2007 = Time and date the event took place
E:010 = Event 010 (see “Event ID numbers and descriptions” on page 137)
Loop 2 initializing = Label (could be the default label or a custom label)