Chapter 4: Reports
P/N 3102352-EN • REV 005 • ISS 28DEC18 163
Supervisory
Trouble
Disable
Other
Correlation Groups report
The panel provides a report for each correlation group in the system. The Correlation Group
report shows all of the devices, zones, and NACs that are assigned to a correlation group.
Correlation group reports can be printed or viewed on the LCD.
To view a Correlation Groups report:
1. Press the Menu button and choose Reports.
2. Choose Correlation Groups.
3. Enter the number of the correlation group for which you want a report.
Correlation Group Configuration report
The Correlation Group Configuration report lists:
• All correlation groups with in-suite signal silence enabled.
— or —
• All correlation groups with an activation count greater than 1. This provides information on
correlation groups programmed for special applications.
To view a Correlation Group Configuration report:
1. Press the menu button and choose Reports.
2. Choose Corr Group Config.
3. Choose one of the following:
Suite Sig Sil
Activation Count
— or —
Delay
To Next Page
Loading...
