Chapter 4: Reports
P/N 3102352-EN • REV 005 • ISS 28DEC18 167
Internal Fault report
The Internal Fault report displays information about an internal fault event (event ID 69) that
has occurred in the system. The report contains information that is important for technical
support when troubleshooting the internal fault event and should typically only be run when
you are asked to do so by a technical support representative.
To view an Internal Fault report:
1. Press the menu button and choose Reports.
2. Choose Int. Fault.
Canceling a report
Once a report is sent to the LCD or printer, you can cancel the report so that it stops printing
on the printer or displaying on the LCD.
To cancel a report:
1. Press the Menu button and choose Reports.
2. Choose Cancel Reports.
3. Choose Yes to cancel the report. Choose No to continue with the report.
4. Continue working with reports,
— or —
Press the Menu button to exit menu mode.
To Next Page
Loading...
