Kidde FX-64 - Setting Daylight Saving Time; Setting the Time and Date

Chapter 2: Front panel programming
P/N 3102352-EN • REV 005 • ISS 28DEC18 57
3. Press Enter.
Setting the time and date
The first step in programming the panel is setting the time and date. You must do this before
using either the Auto Program or Advanced Program command.
To set the time and date:
1. Press the Menu button and choose Program.
2. Choose Date and Time.
3. Enter a level one password.
4. Enter the current date.
5. Enter the current time.
6. Choose Save.
7. Press the Menu button to exit menu mode.
— or —
Continue programming
Setting daylight saving time
Daylight saving time options allow the panel to switch automatically from standard to daylight
saving time and vice versa.
To program daylight saving time options:
1. Display the Program menu and choose Date and Time.
2. Enter a level one password.
3. Choose Daylight Savings.
4. Choose one of the following:
Yes: The panel recognizes daylight saving time
No: The panel does not recognize daylight saving time
5. Set the Month Start. (Values range from 01 to 12, where 01 corresponds to January.)
6. Set the Month End. (Values range from 01 to 12.)
7. Set the Week Start. (Values range from 1 to 5, where 5 corresponds to the last week of the
month.)