- 71 -
FUNCTION SETTINGS
4. DEPTH UNIT
The unit of depth measurement can be selected.
Use the Cursor Shift key ( or ) to select “DEPTH UNIT”.
Use the Cursor Shift key ( or ) to change the setting.
DEPTH UNIT m Use the Cursor Shift key ( or ) to change.
[m, ft, fm, br]
5. TEMPERATURE UNIT
The unit of temperature measurement can be selected.
Use the Cursor Shift key ( or ) to select “TEMP. UNIT”.
Use the Cursor Shift key ( or ) to change the setting.
TEMPERATURE UNIT °C Use the Cursor Shift key ( or ) to change.
[°C, °F]
6. TEMPERATURE ADJUSTMENT
The water temperature displayed on the screen can be adjusted.
Use the Cursor Shift key ( or ) to select “TEMP. ADJUST”.
Use the Cursor Shift key ( or ) to change the setting.
TEMP. ADJUST +0.0°C Use the Cursor Shift key ( or ) to change.
[-9.9°C to +9.9°C , every 0.1 unit ]
+9.9°: maximizes
+0.0°: no adjustment
-9.9°: minimizes
↑ : increases the value.
↓ : decreases the value.
To Next Page
Loading...