Kone NanoSpace - Page 159

KONE NanoSpace™
Owner’s Manual
158 (196) OM-01.03.086
(B) 2016-01-11
© 2014 KONE Corporation
All rights reserved.
Reset the alarm. If the maintenance access
panel is equipped with LCERAL board,
locate it and reset in a following way:
1. Push the RESET button (A) in the
LCERAL board
to reset the alarm.
2. Check that the alarm LED (B) turns off.
Check if the elevator can be returned to
normal use.
Refer to the elevator level fault finding
in
struction
if needed.
Close and lock the maintenance access
panel.
A
B
1070930.wmf
1
0839
11.wmf