Welcome!
Loading the operating system
To backup the Factory Data (Styles, Programs…), see
“Backup Data” on page 17-16.
LOADING THE OPERATING SYSTEM
Your Pa80 can be constantly updated as new versions of the
operating system are released by KORG. You can download
the operating system from www.korgpa.com. Please, read the
Readme file included with the operating system itself.
You can see which version of the operating systems is
installed in your Pa80 by keeping the SHIFT button pressed,
and pressing the ENTER and EXIT buttons together. The
operating system version number will appear in the display.
Press EXIT to close the message window.
To load a new system, follow these instructions:
1.
Copy the three operating system’s files in an empty, MS-
DOS® formatted, HD-type floppy disk. These are the
needed files:
• OSPa80.LZX
• BPa80.SYS
• NBPa80.SYS
2.
Turn the instrument off, and insert the operating system
disk into the disk drive.
3.
Turn the instrument on. A message appears in the dis-
play, asking if you want to load the operating system.
4.
Press ENTER to load, or EXIT to cancel the loading pro-
cedure. If you press ENTER, wait until the loading is fin-
ished.
When the operating system is finished loading, a mes-
sage appears, asking you to remove the floppy disk and
press any button.
5.
Remove the floppy disk, and press any button.
RELOADING THE FACTORY DATA
Should the internal memory content get damaged, you can
reload the original Factory Data from the backup disks. See
“Restore Data” on page 17-16.
To Next Page
Loading...
Need help?
General
