PAGE 4 - ERASE
The Erase function lets you erase files and folders from disks.
Erase procedure
1.
If erasing from a floppy disk, insert the disk into the disk
drive.
2. Select a disk device. Devices are selected in this order:
HD ➛ FD ➛ CRD ➛ SSD ➛ HD…
3. Move the file or folder that you want to erase to the first
line of the display. If the file or folder you are looking for
is in another folder, use the F3 (Open) button to open it.
Press F4 (Close) to go back to the previous hierarchic
level.
4. Press F2 (Erase) to delete the selected item. The “Are you
sure?” message will appear. Press ENTER to confirm, or
EXIT to abort.
When the operation is completed (the “Wait” indicator
disappears), you are kept on the Erase page, and you
may perform further erase operations.
PAGE 5 - FORMAT
The Format function lets you initialize a disk.
Press DISK and use the MENU or PAGE buttons to reach this
page.
Warning: When formatting a disk device, all data it contains is
lost.
FD Fast Format
This is a very fast format command, that you can use on pre-
viously formatted floppy disks. This command rewrites just
the FAT (File Allocation Table) of the disk, without actual
reformatting of all sectors.
If it cannot be executed, the “FD Fast Format failed. Full For-
mat?” message appears. Press ENTER/YES to proceed with
the Full Format, or EXIT/NO to abort.
1. Insert a 3.5” HD or DD/DS floppy disk into the disk
drive, and select this option to format it.
2. Move the FD Fast Format option to the first line of the
display.
3. Press F2 (Format) to confirm formatting.
4. The “Delete all data?” message appears in the display;
press ENTER to confirm, EXIT to abort.
FD Full Format
This is the traditional format command, where each sector of
the floppy disk is formatted. It is slower than the Fast Format
command, but sometimes more reliable.
See above for the procedure.
Hard disk
You must format your hard disk when it has just been
installed, or when you want to delete its content.
Note: When a hard disk is not installed, the “Hard disk” item is
“ghosted” (i.e., not available).
1. Move the Hard disk option to the first line of the display.
2. Press F2 (Format) to confirm formatting.
3. The “Delete all data?” message appears in the display;
press ENTER to confirm, EXIT to abort.
4. The “Please press F4 to continue” message appears in
the display; press F4 to confirm, EXIT to abort.
Card
Use this command to format a Flash Card (the optional Korg
FMC-8MB). Please ask your Korg Authorized Reseller for
more information on available Flash Cards.
Note: When no card is present in the slot on the back of the
instrument, the “Card” item is “ghosted” (i.e., not available).
Note: When writing or formatting a card, the Pa80 is “frozen”.
No other operation may be carried out until the formatting is
completed.
Device Type
HD Hard disk
FD Floppy disk
CRD Flash Card
SSD Solid State Disk (internal memory)
MYFILES.SET |
LIVE.SET
ETHNICA.SET |
FD DEL OPEN CLOSE
Disk:Erase
FD Fast Format |
FD Full Format
Hard disk |
-- FORMAT -- --
Disk:Format
To Next Page
Loading...
Need help?
General
