1. Insert the card to be formatted.
1. Move the Card option to the first line of the display.
2. Press enter. The “Delete all data - Continue?” message
will appear. Press ENTER/YES to confirm, EXIT/NO to
abort.
3. The “Please press F4 to continue” message will appear.
Press F4 to format, EXIT to abort.
4. Wait for the formatting is complete. The “Format Wait”
message appears on top of the page. Wait until format-
ting is complete.
PAGE 6 - NEW DIR
The New Dir function lets you create a new folder in any of
the disks, or inside any generic folder. You can’t create or
open “.SET” folders, since these are reserved folders, to be
created with a Save operation.
Press DISK and use the MENU or PAGE buttons to reach this
page.
New folder procedure
1.
If you wish to create a new folder into a floppy disk,
insert the disk into the disk drive.
2. Select a different disk device. Devices are selected in this
order: HD ➛ FD ➛ CRD ➛ HD…
3. Press one of the A VOLUME/VALUE buttons. You are
prompted to assign a name to the new folder:
Move the cursor using the DOWN/- and UP/+ buttons.
Select a character using the DIAL. Insert a character at
the cursor position by pressing the INSERT button.
Delete a character at the cursor position by pressing the
DELETE button.
4. Press F2 (Create) to confirm. The “Are you sure?” mes-
sage appears. Press ENTER to confirm, EXIT to abort.
PAGE 7 - RENAME
Use the Rename function to change the name of a folder or a
file. To preserve data structure consistence, you can’t rename
single files inside a “.SET” folder, or the “.SET” folder name
extension.
Press DISK and use the MENU or PAGE buttons to reach this
page.
Rename procedure
1.
If the file or folder that you want to rename is in a floppy
disk, insert the disk into the disk drive.
2. Select a disk device. Devices are selected in this order:
HD ➛ FD ➛ CRD ➛ HD…
3. Move the item to rename to the first line. Then press one
of the A VOLUME/VALUE buttons. You are prompted
to change the name:
Move the cursor using the DOWN/- and UP/+ buttons.
Select a character using the DIAL. Insert a character at
the cursor position by pressing the INSERT button.
Delete a character at the cursor position by pressing the
DELETE button.
4. Press F2 (Rename) to confirm. The “Are you sure?” mes-
Device Type
HD Hard disk
FD Floppy disk
CRD Flash Card
FD CREATE OPEN CLOSE
Disk:New Dir
NEW_NAME
Device Type
HD Hard disk
FD Floppy disk
CRD Flash Card
DJSET.SET |
LIVE.SET
ETHNICA.SET |
FD RENAME OPEN CLOSE
Disk:Rename
To Next Page
Loading...
Need help?
General
